Advanced Titanium Materials

Titanium, Nickel, Copper Nickel and Stainless Steels

Mobile Number: 07802 368 589

Duplex / Super Duplex

Grades we supply

UNS 31803, UNS 32750, UNS 32760

Duplex / Super Duplex information

This range of stainless grades combines many of the properties of both Austenitic and Ferritic stainless steels. The high strength and excellent corrosion resistance in demanding conditions, has continued to make this group of steels ideal for many applications.

UNS 31803 (F51): This grade is a very popular and successful alternative to standard stainless steel specifications in applications where higher strength and resistance to stress corrosion cracking is required. It is widely used in power generation, marine, petrochemical, chemical and general engineering industries. Typical applications include fasteners, flanges, bushes and shafts.

UNS 32760 (F55): This material has high mechanical strength and outstanding corrosion resistance especially in marine applications. It is therefore regarded as an extremely strong option in place of the traditional stainless 300 series and often in lieu of Nickel Alloy grades.

UNS 32750 (F53): With its excellent corrosion resistance in a variety of conditions, this material is particularly favoured in marine applications as it offers outstanding resistance to pitting and corrosion. With a low coefficient of thermal expansion and higher heat conductivity over austenitic steels, it is suitable for working temperatures of up to 300 degrees centigrade.

Typical Supply Sizes

Round Bar generally from 12.7mm to 305mm dia.

Typical Mechanical Properties (bar)
Type Condition Tensile Range (Mpa) Yield 0.2 % (Mpa) min Elongation % min Red of Area % Impacts (Joules) (min) Hardness HRC (max)
UNS 31803 Sol Treated 650-880 450 25 45 - -
UNS 32750 Sol Treated 800 550 25 - -
UNS 32760 Sol treated 650-880 550 25 45 -
The above figures represent typical values and are for guidance and information only and should be regarded as such. They are not guaranteed nor intended as warranties of suitability for any applications noted. Other expected mechanical properties will of course be determined by differing sizes and heat treated conditions.